HDMI to Composite Scaler lets you transform HDMI video of any resolution from 480i to 1080i into Composite video or S-Video

How it works

Simply connect your HDMI video source to the HDMI input jack of the GefenTV HDMI to Composite Scaler. Connect your Composite or S-Video display cable to the correct video output jack on the Scaler's rear panel. RCA-type analog audio output jacks and Coaxial S/PDIF digital audio output jacks allow for the connection of an audio receiver or other device to receive the audio signal embedded in the HDMI signal. Power-cycle all connected components, then use the IR remote control to activate the onscreen menu and adjust the settings to your liking. You will then have HDMI video playing on your Composite or S-Video display with simultaneous audio out.

Note: This device does NOT convert HDCP HDMI signals.

This device supports both NTSC and PAL video standards.

Features:

HDMI to Composite / S-Video conversion plus scaling

HDMI pass-through

Supports 480i to 1080i HDMI input resolutions

Outputs 480i / 576i signal for Composite/S-Video

Supports both NTSC and PAL formats

Specifications:

Input Video Signal: 1.2V p-p

Input Sync Signal: 5V p-p (TTL)

Horizontal Frequency Range: 15-70 KHz

Vertical Frequency Range: 30-170 KHz

Video In/Out: 1 L/R Composite RCA / 1 S-Video

Audio In/Out: 2 L/R RCA audio, 2 S/PDIF digital audio

Power Consumption: 13 Watts (maximum)

Power Supply: 5V DC